OBP-2
OBP-2

The OBP-2 was designed to give bassists fat tone while being small enough to fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. With +/-18dB of boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you have can emphasize just the right frequencies to make your bass sound great in any mix.

Other Preamps
  • OBP-1
  • OBP-3
Shop Now

Bass control: plus/minus 18 dB @ 40 Hz.

Treble control: plus/minus 16 dB @ 6.5 KHz.

Input impedance: 1 meg ohm

Output impedance: 100 ohm 9 or 18 volts operation.

Distortion: .019 into 10k ohm load

Noise: -95 dBm unweighted.

Battery life: 324 hours

Wire lead length: 6.50 inches

Low noise discrete FET input stage, center detent 50 K linear pots,with a dual concentric pot available.

Dimensions: 0.98"W x 0.98"L x 0.59"D

Warranty: Three year limited warranty.

Available in the following kits:

OBP-2TK: Includes separate Treble and Bass pots.

OBP-2SK: Includes stacked Treble/Bass pot.

Dave Boonshoft

"Aguilar OBP preamps gives your bass a broad tone palate while keeping it's inherent tone."

Dave Boonshoft, President - Aguilar Amplification

  • 599 Broadway 7th Floor New York, NY 10012
  • • Tel: +1 212 431 9109
  • • info@aguilaramp.com
  • © 2011 Aguilar Amplification LLC. All rights reserved.